Level Instruments

Showing 97–108 of 126 results

  • Plast-O-Matic GL Level Indicator

    Plast-O-Matic® type GY flow indicators are designed to indicate the presence or clarity of high purity or corrosive liquid in a piping system, and are meant for use with ultra pure liquids or chemicals compatible with acrylic. Ends are Geon® PVC and Polypropylene. The indicator is simply threaded into a piping system and should be connected to plastic fittings. The transparent inner cylinder wall is Pyrex, a borosilicate glass that resists attack from most bases and acids with the exception of hydrofluoric acid and sodium hydroxide. The transparent outer cylinder wall is a high impact strength acrylic, ultra-violet resistant, and has an extremely high light transmission factor.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series
    Plast-O-Matic GY
  • SSI Technologies DFT-110 Level Sensor

    SSI® type DFT-110 ultrasonic level sensors are cost competitive non-contact liquid level drum gauges. The DFT-110 was designed for usage on ANSI MH2-2004 vertical drums with ≤32″ depths. The gauge allows the user to easily select between the following vertical drum settings: 15, 30, or 55 gallon and 57, 114, or 208 liter. It is not intended for use with gasoline.

    Get a Quote Data Sheet

    Button Text Button Text
    Moving or Non-Moving Parts Technology Body Material Media Contact
    Non-Moving Parts Ultrasonic Plastic Non-Contact
  • SSI Technologies DFT-220 Level Sensor

    SSI® type DFT-220 ultrasonic level sensors are cost competitive non-contact liquid level drum gauges with 4-20 mA output. The DFT-220 was designed for usage on standard ANSI MH2-2004 vertical drums with ≤32″ depths. The gauge allows the user to easily select between the following vertical drum settings: 15, 30, or 55 gallon and 57, 114, or 208 liter. It is not intended for use with gasoline.

    Get a Quote Data Sheet

    Button Text Button Text
    Moving or Non-Moving Parts Technology Body Material Media Contact
    Non-Moving Parts Ultrasonic Plastic Non-Contact
  • SSI Technologies Fluid-Trac Level Sensor

    SSI® type Fluid-Trac ultrasonic level sensors are a liquid level sensor family ideal for tanks or storage containers that have a depth/height of 32″ or 24″ for gasoline. They are compatible with gasoline, diesel fuels, ethanol, oils, fresh water, sewage water, URED (AdBlue), and engine coolants. They are available in two-wire, three-wire resistive output, three-wire voltage output, and focus tube application models.

    Get a Quote Data Sheet

    Button Text
    Moving or Non-Moving Parts Technology Body Material Media Contact
    Non-Moving Parts Ultrasonic Plastic Non-Contact, Wetted
  • Tel-Tru P421 Level Sensor

    Tel-Tru® type P421 pressure level sensors are designed for the OEM and end-users where continuous submersion in sludge/slurry applications is required. Their key feature is the clog free design of the sensing diaphragm, which improves reliability and lowers maintenance. An internal network of MOVs and dual gas discharge tubes protect against lightning, while dual sealing techniques ensure the integrity of the waterproof seal. The all welded sensing diaphragm is backed up with a solid piece of stainless steel and can withstand the most abrasive/cyclical applications.

    Get a Quote Data Sheet

    Button Text
    Moving or Non-Moving Parts Technology Body Material Media Contact
    Non-Moving Parts Pressure Stainless Steel Wetted
  • Tel-Tru P431 Level Sensor

    Tel-Tru® type P431 pressure level sensors are designed for low cost of ownership for level/depth measurement applications in shallow or deep wells. Their key features are long term stability, internal protection from lightning via dual gas discharge tubes, internal EMI/RFI filtering, double sealed cable, and a maintenance free vent filter. Common applications include irrigation, level and depth measurement, underground storage, water resource, well water, and coal bed methane.

    Get a Quote Data Sheet

    Button Text
    Moving or Non-Moving Parts Technology Body Material Media Contact
    Non-Moving Parts Pressure Stainless Steel Wetted
  • Warrick 16 Liquid Level Controller

    Gems® type 16 open circuit board controls are engineered for general purpose single-level or differential applications. They feature spade terminals for easy wiring and provide sensitivities up to 1 million ohm/cm. The 16D has the same features and specifications as the 16, but also has DPDT load contacts to eliminate the need for slave relays. Common applications include single-level service, point level, valve control, low-water cutoff, differential service, alarms, and pump control.

    Get a Quote Data Sheet ‘2’ align=’center’]Get a Quote[/fc][/modal]

    Button Text
    Manufacturer Series Controller Type
    Warrick 16 General Purpose
  • Warrick 16M Liquid Level Controller

    Gems® type 16M solid state plug-in modules are designed for either differential or single-level service. They feature U.L. “Motor Controller” listing, an 8 pin socket with screw type connections for easy installation and service, and a sensitivity up to 1 million ohm/cm. Series 16HM provides higher sensitivity up to 5.5 million ohm/cm and a probe voltage of 12VDC for applications with low conductive media. Series 16DM has DPDT load contacts, 11 pin octal plugs, and eliminates the need for slave relays. Series 16VM features field adjustable sensitivity through external setpoint resistors and uses an 11 pin octal socket.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 16M General Purpose
  • Warrick 17 Liquid Level Controller

    Gems® type 17 intrinsically safe controls are FM Approved for use in Class I or II, Division 1, Groups A – G hazardous atmospheres. They have SPST isolated contacts, and feature field adjustable sensitivity by use of external resistors. Common applications include hazardous atmospheres, pumps, waste treatment, alarms, sewage, and CP industry.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 17 General Purpose, Intrinsically Safe
  • Warrick 19MR Liquid Level Controller

    Gems® type 19MR have a direct motor load of 30 Amps @ 240 VAC and are the ideal choice where pump up or pump down service is necessary. These controls eliminate the need for contactors because they can directly handle motors up to 1 HP at 120 VAC, or motors up to 2 HP at 240 VAC.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 19MR Relay Output
  • Warrick 26 Liquid Level Controller

    Gems® type 26 low water cut-offs are designed for boiler low water cut-off protection. A snap-through standoff mounting device is available. Optional power outage feature resets after nuisance outages, and an optional reset button is used when device has been deactivated because of low water condition. An optional test feature allows LLCO circuit to be tested without draining the water. A built-in 3 second time delay is standard, with up to 90 seconds available for increasing and decreasing levels.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 26 Low-Water Cutoff
  • Warrick 26M Liquid Level Controller

    Gems® type 26M is designed for low water cut-off protection. This control meets CSD1 requirements for boiler low water cut-off. Series 26M features powered contacts. Common applications include low water cut-off, point level, and alarms.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 26M Low-Water Cutoff