Warrick Controls

Showing 1–12 of 24 results

  • Warrick 16 Liquid Level Controller

    Gems® type 16 open circuit board controls are engineered for general purpose single-level or differential applications. They feature spade terminals for easy wiring and provide sensitivities up to 1 million ohm/cm. The 16D has the same features and specifications as the 16, but also has DPDT load contacts to eliminate the need for slave relays. Common applications include single-level service, point level, valve control, low-water cutoff, differential service, alarms, and pump control.

    Get a Quote Data Sheet ‘2’ align=’center’]Get a Quote[/fc][/modal]

    Button Text
    Manufacturer Series Controller Type
    Warrick 16 General Purpose
  • Warrick 16M Liquid Level Controller

    Gems® type 16M solid state plug-in modules are designed for either differential or single-level service. They feature U.L. “Motor Controller” listing, an 8 pin socket with screw type connections for easy installation and service, and a sensitivity up to 1 million ohm/cm. Series 16HM provides higher sensitivity up to 5.5 million ohm/cm and a probe voltage of 12VDC for applications with low conductive media. Series 16DM has DPDT load contacts, 11 pin octal plugs, and eliminates the need for slave relays. Series 16VM features field adjustable sensitivity through external setpoint resistors and uses an 11 pin octal socket.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 16M General Purpose
  • Warrick 17 Liquid Level Controller

    Gems® type 17 intrinsically safe controls are FM Approved for use in Class I or II, Division 1, Groups A – G hazardous atmospheres. They have SPST isolated contacts, and feature field adjustable sensitivity by use of external resistors. Common applications include hazardous atmospheres, pumps, waste treatment, alarms, sewage, and CP industry.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 17 General Purpose, Intrinsically Safe
  • Warrick 19MR Liquid Level Controller

    Gems® type 19MR have a direct motor load of 30 Amps @ 240 VAC and are the ideal choice where pump up or pump down service is necessary. These controls eliminate the need for contactors because they can directly handle motors up to 1 HP at 120 VAC, or motors up to 2 HP at 240 VAC.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 19MR Relay Output
  • Warrick 26 Liquid Level Controller

    Gems® type 26 low water cut-offs are designed for boiler low water cut-off protection. A snap-through standoff mounting device is available. Optional power outage feature resets after nuisance outages, and an optional reset button is used when device has been deactivated because of low water condition. An optional test feature allows LLCO circuit to be tested without draining the water. A built-in 3 second time delay is standard, with up to 90 seconds available for increasing and decreasing levels.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 26 Low-Water Cutoff
  • Warrick 26M Liquid Level Controller

    Gems® type 26M is designed for low water cut-off protection. This control meets CSD1 requirements for boiler low water cut-off. Series 26M features powered contacts. Common applications include low water cut-off, point level, and alarms.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 26M Low-Water Cutoff
  • Warrick 27 Liquid Level Controller

    Gems® type 27 intrinsically safe controls are UL Approved for use in Class I, Groups A, B, C, D, Class II, Groups E, F, G, and Class III hazardous locations. They are CSA Certified, UL Pilot Duty rated, and have SPDT output contacts. Common applications include hazardous atmospheres, pumps, waste treatment, alarms, sewage, and CP industry.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Controller Type
    Warrick 27 General Purpose, Intrinsically Safe
  • Warrick 3B Electrode Fitting

    Gems® type 3B fittings are compact pressure tight assemblies that hold a single electrode probe for use in water and chemicals. These fittings incorporate a ¼-20 female thread that must be combined with a Series 3R (rigid rod electrode) or Series 3W/3Y (wire suspended electrode) to make a complete assembly.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Fitting Style Probe Type
    Warrick 3B NPT w/o Head
  • Warrick 3C Electrode Fitting

    Gems® type 3C side chamber fittings are cast iron or brass, pressure-tight chambers containing up to four probes from 1½” to 6″ in length. Pipe tappings provide connection to the side of boilers and pressure vessels to equalize the level in the chamber with the level in the vessel. Common applications include boilers, hydropneumatic tanks, steam generators, pressure vessels, pump operation, and low water/high water alarm.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Chamber Type
    Warrick 3C Short
  • Warrick 3E Electrode Fitting

    Gems® type 3E fittings are cast metal, pressure-tight assemblies capable of handling 1 – 7 probes. Attachment to vessels is accomplished with external pipe threading. 3E fittings require the use of 3R rigid or 3W wire suspended electrodes.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Fitting Style Probe Type
    Warrick 3E NPT w/ Head
  • Warrick 3F Electrode Fitting

    Gems® type 3F flanged, pressure-tight fittings are designed for general purpose service and can handle up to seven probes. They mate with standard pipe flanges coupled to the top of the vessel. They are available in a variety of materials.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Fitting Style Probe Type
    Warrick 3F Flanged w/ Head
  • Warrick 3G Electrode Fitting

    Gems® type 3G fittings are designed for general purpose use, and are made of PVC to withstand corrosive conditions. The flanged assemblies are sized to accommodate up to seven probes and to mate with standard flanges on the tops of vessels.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Fitting Style Probe Type
    Warrick 3G PVC Head